Making Calls With Multiple Lines; Incoming Calls; Accepting Calls For The Primary Line; Accepting Calls For Secondary Lines - Siemens OpenScape 35G User Manual

Making calls with multiple lines

Step by step
106
Making calls with multiple lines
You can use your OpenScape Desk Phone IP 35G as a
multi-line phone. If you have any questions regarding
how to configure your OpenScape DeskPhone IP 35G
phone as a multi-line phone, please contact your admin-
istrator.
The following is a description of the telephony scenari-
os for multi-line phones. To facilitate comprehension,
you should familiarize yourself with the enhanced tele-
phony application and how to use the line keys before-
hand. You can make further individual settings for your
multi-line phone. Refer to the following sections for a
detailed description of the individual components:
Introduction to multi-line phones  page 12
•
Lines and line keys  page 17
•

Incoming calls

Depending on your individual settings, you will be noti-
fied of incoming calls  page 164.

Accepting calls for the primary line

In this case, the telephone behaves in the same way as
a single-line telephone. See  page 31 and  page 74.

Accepting calls for secondary lines

Prerequisite: The secondary line is configured on your
multi-line telephone.
Using the handset
^
Lift the handset.
[
Conduct call.
The line used for the ringtone is selected auto-
matically. If there are calls on several lines, you
are connected with the line that has been ringing
the longest.