Programming Sensor Keys; Beginning Programming - Siemens OpenStage 40 User Manual

Step by step
OK
Settings
User
Phone
Program keys

Programming sensor keys

z You can also configure this setting via the Web interface
page 184.

Beginning programming

Directly via a sensor key
S
Hold down the sensor key to which a function should be
assigned until the programming prompt is displayed.
If the prompt is not displayed or a programmed
function is not executed, then you can only
launch key programming via the user menu (ask
your administrator about the current setting).
Confirm to begin programming. The sensor key illumi-
nates continuously.
or Via the user menu
You can also program keys via the user menu.
N
Press the key shown.
Select and confirm the option shown.
Select and confirm the option shown.
j
if nec.
Enter and confirm the User password.
Select and confirm the option shown.
Select and confirm the option shown. You are prompted
to press the key you wish to program.
S
Press the sensor key you want to program with a func-
tion. The sensor key illuminates continuously.
Programmable sensor keys
51