Siemens OpenStage 40 User Manual page 65

Step by step
Settings
User
Configuration
Connected calls?
Hold rem. delay
Save & Exit
Setting the hold reminder time
Use the "Hold reminder" function to set the length of
the timeout before an automatic reminder is issued
about a held call.
The minimum value is 1, that is, the reminder is output
after one minute. The maximum value is 99 minutes.
Press 0 to deactivate the reminder.
z You can also configure this setting via the Web interface
page 184.
N
Press the key shown.
Select and confirm the option shown.
Select and confirm the option shown.
j
if nec.
Enter and confirm the User password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
j
Enter a value between 3 and 15 and confirm.
Select and confirm the option shown.
Enhanced phone functions
65