Conducting Calls - With Multiple Users; Camp-On - Siemens HiPath 4000 Operating Manual

Conducting calls – with multiple users
Step by Step
> <

CAMP-ON

72
Conducting calls – with multiple
users
Camp-on
You need to speak to a user in your communication sys-
tem urgently, even though his line is busy. You can send
a call waiting signal during his call to let him know you
want to talk to him. The user either answers immediate-
ly or you will be automatically connected to him when
he has finished his call.
This function is only available if it has been configured
by the service engineer.
The user is busy. You want to use call waiting.
[
Select the menu item, confirm and wait briefly.
Note:
To camp on, you must have the appropriate class
of service.
Camp-on is not possible if the called party is pro-
tected by the camp-on security function.
You receive a call waiting signal (second call)
You are still available to other callers, even though you
are on the telephone. The call waiting signal informs you
of the second call while you are conducting a call. You
can answer this call without ending the first call.
p
You are on a call and hear a call waiting signal.
If you want to answer the second call, you can either
place the first call on hold (the first caller waits) or end
the first call.