Making Calls With Multiple Lines; Incoming Calls; Accepting Calls For The Primary Line; Accepting Calls For Secondary Lines - Siemens OpenScape Voice Operating Manual

Making calls with multiple lines

Step by Step
96
Making calls with multiple lines
You can use your OpenStage 60/80 as a multi-line
phone. If you have any questions regarding how to con-
figure your OpenStage phone as a multi-line phone,
please contact your administrator.
The following is a description of the telephony scenari-
os for multi-line phones. To facilitate comprehension,
you should familiarize yourself with the enhanced tele-
phony application and how to use the line keys before-
hand. Furthermore, you can specify individual settings
for your multi-line telephone. Refer to the following sec-
tions for a detailed description of the individual compo-
nents:
• Introduction to multi-line phones
• Lines and line keys
• Multi-line telephony interface
• Individual settings

Incoming calls

Depending on your individual settings, you will be noti-
fied of incoming calls

Accepting calls for the primary line

In this case, the telephone behaves in the same way as
a single-line telephone. See

Accepting calls for secondary lines

Prerequisite: The secondary line is configured on your
multi-line telephone.
Using the handset
^
Lift the handset.
[
Conduct call.
The line that rings is automatically selected. If
calls are ringing on more than one line, you will
be connected to the line that has been ringing
the longest.
page 13
page 22
page 35
page 104
page 158.
page 46 and page 73.