Shifting The Image - Xerox WorkCentre 7120 User Manual

Shifting the Image

You can change the placement of the image on the copy page. This is useful if the image size is smaller
than the page size.
Originals must be positioned correctly for image shift to work correctly. For details, see
on page 96.
• Document feeder: position originals faceup, left (long) edge entering the feeder first.
• Document glass: position originals facedown, in the back-left corner of the document glass, long
edge to the left.
To change image placement:
Touch Copy on the touch screen, then touch the Layout Adjustment tab.
1.
Touch Image Shift.
2.
To center the image on the page, touch Auto Center.
3.
4. To specify the position of the image:
a. Touch Margin Shift.
b. To specify the amount of Up/Down and Left/Right shift for Side 1, touch the plus or minus
(+/–) buttons.
c. If you selected 2-sided copies: to specify the amount to erase from each edge on Side 2,
touch the plus or minus (+/–) buttons, or touch Mirror Side 1.
5. To specify the original's orientation as you place it in the document feeder or on the document
glass, touch Original Orientation, then touch either Upright Image or Sideways Image (top to
left), then touch Save.
Note: If preset values were previously saved, select the preset in the lower-left corner of the window.
Touch Save.
6.
Rotating the Image
If the orientation of the paper currently loaded in the selected tray differs from that of your original,
the printer automatically rotates the copy to fit on the paper.
1. Touch Copy on the touch screen, then touch the Layout Adjustment tab.
2. Touch Image Rotation, then select from the following:
• To cancel rotation, touch Off.
• For automatic rotation of the copy of your original to fit correctly on your selected paper,
touch Always On.
• For automatic rotation of the copy of your original when Auto Paper Select or Auto % is
selected, touch On during Auto.
3. Touch Save.
WorkCentre 7120 Multifunction Printer
Copying
Basic Copying
107
User Guide