Xerox WorkCentre 7120 User Manual page 109

If the Office Finisher LX with Booklet Maker option is installed, touch No Crease & Staple, Crease
4.
& Staple or Crease Only.
5. You can add margins in the center binding area to compensate for the thickness of the booklet:
a. Touch Binding Shift, then touch the plus or minus (+/–) buttons to set the shift.
Touch Save.
b.
To add covers, touch Covers, then touch Blank Cover, Print on Both or
6.
1-Sided Covers Print Outside.
• Touch the tray loaded with cover paper and the tray loaded with main body paper. Touch Save.
• To print the copy of the last original page on the back cover for Blank Cover and Print on
Both, touch Last Page on Back Cover, then touch Save.
7. To sub-divide a large booklet into subsets, touch Divide Output, then touch On.
8. To enter the number of sheets for each subset, touch the plus or minus (+/–) buttons, then
touch Save.
9. Offset Stacking places each stack of printed pages slightly to the left or right of the previous stack
for easier separation.
Touch Output /Offset.
a.
Touch Center Tray Upper or Center Tray Lower. For automatic creasing, touch
b.
Right Middle Tray.
c. Touch Offset Stacking, then touch System Default, No Offset, Offset Per Set or Offset Per
Job, then touch Save.
10. Touch Save.
Including Covers
To add covers to a copy job, select different trays for the first and last page. Those trays can be loaded
with heavier stock, color or pre-printed paper. The covers can be blank or printed.
Note: The paper used for the covers must be the same size as the paper used for the rest of
the document.
To select the type of covers and the tray to use for the cover paper:
Touch Copy on the touch screen, then touch the Output Format tab.
1.
Touch Covers.
2.
3. To include both a front and back cover that use the same tray and printing options:
Touch Front & Back Covers.
a.
b. Touch a printing option for the cover: Blank Cover, 1-Sided Covers or Print on Both.
c. Touch the tray to use for the covers, then touch the tray to use for the main body.
4. To include only a front cover or only a back cover:
a. Touch Front Cover Only or Back Cover Only.
b. Touch a printing option for the cover: Blank Cover, 1-Sided Covers or Print on Both.
c. Touch the tray to use for the covers, then touch the tray to use for the main body of the document.
5. Touch Save.
WorkCentre 7120 Multifunction Printer
Copying
109
User Guide