Booklet Maker Staple Replacement For Office Lx Finisher - Xerox WorkCentre 7120 User Manual

Booklet Maker Staple Replacement for Office LX Finisher

Note: The booklet maker uses two staple cartridges labeled R2 and R3. Booklet stapling requires
that both staple cartridges contain staples.
WARNING: Do not perform this procedure when the printer is copying or printing.
1. Open the booklet maker side cover.
2. If the staple cartridges are not visible, grip the vertical panels at the left and right of the opening
and gently slide them to the center until they stop.
3. Grip the orange tabs on both sides of the staple cartridge and pull the cartridge out of the stapler.
wc7120-054
wc7120-055
wc7120-056
WorkCentre 7120 Multifunction Printer
Maintenance
173
User Guide