Xerox WorkCentre 7120 User Manual page 183

5. Turn the knob to eject the paper upward. Pull gently on the paper to remove it from the
document feeder.
6. Close the inner cover, then close the document feeder top cover until it clicks into place. Confirm
that the cover is fully closed on both the near and far sides.
7. If the jammed paper is not visible, raise the document feeder. Remove any jammed paper from
under the document feeder or from the document glass.
8. Close the document feeder.
9. If the jammed paper is not visible, lift the document feeder tray and remove the jammed paper.
10. Return the document feeder tray to its original position.
11. To resume document scanning, make sure the paper is not torn, wrinkled or folded, then reload the
entire document, including the pages already scanned. The printer will automatically skip the
previously scanned pages and resume scanning with the unscanned pages.
CAUTION:
Torn, wrinkled or folded originals may cause jams and damage the printer. To scan
them, use the document glass.
wc7120-095
wc7120-096
WorkCentre 7120 Multifunction Printer
Troubleshooting
183
User Guide