Xerox WorkCentre 7120 User Manual page 39

1. Open the front cover.
2. Press the main power switch to the on position.
3. Close the front cover.
4. Press the power switch, visible on the lower center tray, to the on position to turn the printer on.
The printer takes approximately 35 seconds to warm up before use.
Note: When the optional Office Finisher LX is attached, the power switch is located behind a clear
plastic door in the finisher transport cover/center tray.
Power switch
wc7120-008
Power switch with optional Office Finisher LX
wc7120-015
wc7120-011
WorkCentre 7120 Multifunction Printer
Installation and Setup
wc7120-009
39
User Guide