Booklet Maker Staple Replacement for Office LX Finisher
Note:
The booklet maker uses two staple cartridges labeled R2 and R3. Booklet stapling requires
that both staple cartridges contain staples.
WARNING:
Do not perform this procedure when the printer is copying or printing.
1.
Open the booklet maker side cover.
2.
If the staple cartridges are not visible, grip the vertical panels at the left and right of the opening
and gently slide them to the center until they stop.
3.
Grip the orange tabs on both sides of the staple cartridge and pull the cartridge out of the stapler.
wc53xx-054
wc53xx-055
wc53xx-056
WorkCentre 5300 Series Multifunction Printer
Maintenance
165
User Guide