HP Bc1500 - BladeSystem - Blade PC User Manual page 74

Command Line Interface
Functions Exclusive to the Command Line Interface (continued)
Function
Enclosure Management Commands (Continued)
SHOW SYSLOG
BAY <bay
number>
ADD
IPMANAGER <IP
address>
DISABLE
ALERTMAIL
DISABLE
IPSECURITY
DISABLE NTP
ENABLE
ALERTMAIL
ENABLE
IPSECURITY
ENABLE NTP
5-24
Description
Displays the syslog of a specified blade with 22 lines
per screen.
Typing q quits the command; any other key shows
the next screen if more information is available to
display. The system log of the blade PC is not stored
between reboots, so the information only includes
what has taken place since the last power on of the
Integrated Administrator.
Typing c displays the System Log continuously
without page breaks.
Adds an IP address to the list of clients allowed to
connect to Integrated Administrator.
Disables sending e-mail for Integrated Administrator
alerts.
Allows all clients to connect to Integrated
Administrator.
Disables automatic updates of the date and time to
the Integrated Administrator.
Enables sending e-mail for Integrated Administrator
alerts.
Restricts clients from being able to connect to
Integrated Administrator.
Enables automatic time and date updates to
Integrated Administrator.
HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User Guide
Capability
Exclusive to CLI
All
Only enclosure
administrators
may execute this
command.
Only enclosure
administrators
may execute this
command.
Only enclosure
administrators
may execute this
command.
Only enclosure
administrators
may execute this
command.
Only enclosure
administrators
may execute this
command.
Only enclosure
administrators
may execute this
command.
Only enclosure
administrators
may execute this
command.