Blade Pc Bay Management Commands - HP Bc1500 - BladeSystem - Blade PC User Manual

Enclosure Management Commands (continued)
Command
UPDATE
IMAGE
<url>
UPLOAD
CONFIG
<url>

Blade PC Bay Management Commands

Blade PC Bay Management Commands
Command
CLEAR BAY
BOOT [FIRST |
ONCE |
ALWAYS]
[ALL | <bay
number> {[ , | -
] <bay
number>}]
CLEAR
SESSION BAY
<bay number>
CONNECT
BAY
<bay number>
HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User Guide
Description
Downloads a new image from a blade
over the network and uses the image to
update the firmware of the enclosure.
Upload the current runtime configuration to
the specified FTP or TFTP server.
Description
Clears the setting for the IPL to be passed
to the blade at the next reboot. The FIRST
argument resets the IPL for all subsequent
reboots. The ONCE argument resets the
IPL for the next reboot only. The Always
argument resets the IPL for every reboot.
This command is only valid for present
blades.
This command may require a firmware
update for the BIOS ROM of certain HP
blade PCs.
Terminates a Terminal session from the
enclosure.
This is not a graceful termination. The
connected user loses any unsaved work.
Opens a remote console session to the
blade PC with that blade PC bay number.
A blade PC can only support one remote
console session at a time.
Command Line Interface
Restrictions
Only enclosure administrators
may execute this command.
URL can be any of the
following:
• http://host/path
• tftp://host/path
• ftp://username:password
• @host/path
• ftp://host/path
where host is a fully
qualified domain name
or an IP address and path
is the pathname of the
flash image to download
Only enclosure administrators
may execute this command.
Restrictions
Only enclosure and group
administrators may execute
this command.
Enclosure administrators may
execute this command for
blade PC bays and the
interconnect switch.
Only enclosure and group
administrators may execute
this command.
5-15