HP Bc1500 - BladeSystem - Blade PC User Manual page 119

3. When the serial console prompt appears, press the
✎
This command is case-insensitive.
L
Pressing the
Password/Flash Disaster Recovery mode and reboots the system.
This command boots the system in Flash Disaster Recovery mode, prints a message, and resets
the enclosure.
Upon entering Flash Disaster Recovery mode, the Integrated Administrator attempts to acquire a
DHCP address. If successful, the Integrated Administrator prompts the user for:
■
IP address of the TFTP server
■
Filename of the ROM on the TFTP server
The Integrated Administrator then downloads and verifies the ROM and updates the flash
memory.
✎
No timeout exists for obtaining a DHCP address.
✎
If the ROM does not download properly or if the verification step fails, Flash Disaster Recovery
mode restarts with another attempt to acquire a DHCP address.
The Integrated Administrator reboots.
HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User Guide
key launches Lost Password recovery mode. Pressing any other key exits Lost
Performing Advanced Functions
F
key.
8-9