Setting Up The Web-Based User Interface - HP Bc1500 - BladeSystem - Blade PC User Manual

Getting Started
to assign a static IP address to the Integrated Administrator:
SET IPCONFIG STATIC <IP address> <subnet mask>
SET GATEWAY <IP address>
SET DNS <primary address> {<secondary address>}
You can now access the Integrated Administrator using a Web browser, Secure Shell, Telnet,
or SNMP.

Setting Up the Web-Based User Interface

To set up the Web-based user interface, proceed as follows:
1. Type the Integrated Administrator IP address or DNS name in the address bar of the Web
browser. A security alert displays as shown below.
If you click Yes, the browser continues to the Login window of Integrated Administrator.
The alert message appears each time you access the Integrated Administrator management
processor in a browser.
If you click No, you are returned to what was previously displayed on your browser.
If you click View Certificate, a popup window displays the certificate information.
Installing the certificate to your browser prevents the security alert message from displaying
in the future.
✎
To install your own certificate onto the Integrated Administrator rather than the automatically
generated certificate, see the information on certificate-related commands in
section "Administering Security Certificates."
If the certificate is removed from your browser, the security alert message is displayed again.
2. Install the certificate to your browser:
a. Click Install Certificate. The Certificate Manager Import Wizard starts.
b. Click Next.
c. Click Next for the browser to automatically select the certificate store when the
Certificate Store window appears.
3-4 HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User Guide
Chapter 8, in