Enclosure Management Commands - HP Bc1500 - BladeSystem - Blade PC User Manual

Command Line Interface

Enclosure Management Commands

Enclosure Management Commands
Command
CLEAR
SYSLOG
ENCLOSURE
POWEROFF
ENCLOSURE
{FORCE}
RESTART
SET DATE
MMDDhhmm
{{CC}YY} {TZ}
SET
ENCLOSURE
ASSET {TAG}
<asset tag>
5-12
Description
Clears the enclosure system log.
Performs a graceful shutdown of
the enclosure. Each blade is first
gracefully shut down. If the FORCE
argument is given, the enclosure
and all blades are immediately
shutdown.
Restarts the Integrated
Administrator. This does not affect
operation of bays in the system.
Sets the date of the enclosure with
the following definitions:
• MM: month
• DD: day
• hh: hour (24-hour format)
• mm: minute
• CC: century
• YY: year
• TZ: time zone (case-sensitive)
If the time zone is left blank, the
current time is left in effect.
Changes the enclosure asset tag
HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User Guide
Restrictions
Only enclosure administrators may
execute this command. Once deleted,
this information cannot be restored.
Only enclosure administrators may
execute this command.
Only enclosure administrators may
execute this command.
Only enclosure administrators may
execute this command.
• MM is an integer from 1-12
• DD is an integer from 1-31
• hh is an integer from 0-23
• mm is an integer from 0-59
For a list of time zones, see Appendix
F, "Time Zone Settings." NTP must be
disabled before manually setting the
date and time.
Only enclosure administrators may
execute this command.
The <asset tag> must be 1-31
characters long and can include
alphanumeric, dash, and underscore
characters.
The default enclosure asset tag is
blank. To set a blank asset tag, specify
the blank value using the quotes.