Related Documents - HP Bc1500 - BladeSystem - Blade PC User Manual

Introduction
Symbol

Related Documents

For additional information on the topics covered in this guide, refer to the following
documentation:
■
White paper: Network Considerations Guide
■
QuickSpecs
■
Setup and Installation Guide: HP BladeSystem bc1500 Blade PC and PC Blade Enclosure
■
White paper: HP Rack 9000 and 10000 Series installation and best practices
■
Installation Guide: HP BladeSystem PC Blade Switch
■
Command Line Interface Reference Guide: HP BladeSystem PC Blade Switch
■
Embedded Web System User Guide for the HP BladeSystem PC Blade Switch
1-2
Description
This warning symbol, in conjunction with any of the following symbols,
indicates the presence of a potential hazard. The potential exists if warnings
are not observed. Consult the documentation for specific details.
This warning symbol indicates the presence of hazardous energy circuits or
electric shock hazards, Refer all servicing to qualified personnel.
This warning symbol indicates the presence of electrical shock hazards. The
area contains no user or field serviceable parts. Do not open for any reason.
This warning symbol on or near an RJ-45 receptacle indicates a network
interface connection. To reduce the risk of electric shock, fire, or damage to
the equipment, do not plug a telephone or telecommunications connector
into this receptacle.
This warning symbol indicates the presence of a hot surface or component. If
this surface is contacted, the potential for in jury exists.
These information symbols indicate that the equipment is powered by
multiple power sources.
Information symbol. This symbol (accompanied by the weight in kgs and lbs)
indicates that the component exceeds the recommended weight for one
individual to handle safely.
HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User Guide