B Error Messages; Warning Messages; Enclosure Warning Messages - HP Bc1500 - BladeSystem - Blade PC User Manual

The messages provided in this appendix are divided into the following categories:
■

Warning messages

■
Error messages
Warning Messages
This section provides a comprehensive list of warning messages specific to the major
components of the Integrated Administrator. These warning messages advise you that you have
implemented a configuration change or prompt you to confirm whether you wish to proceed with
your requested action.

Enclosure Warning Messages

Enclosure Warning Messages
Warning Message
Are you sure you want to disable the Web protocol? Disabling
this protocol will prevent access to the Web-based user
interface until a terminal session re-enables the Web protocol.
Are you sure you want to disable the Secure Shell protocol?
Disabling this protocol will prevent access to the Web-based
user interface and Secure Shell terminal interface until a
terminal session re-enables the Secure Shell protocol.
The SNMP protocol is currently disabled. The new settings will
not take effect until this protocol is enabled on the Network
Configuration screen.
The Read Community field is empty. The Read Community will
be set to "public". The SNMP protocol may be disabled on the
Network Configuration screen.
Are you sure that you want to power off the enclosure?
Are you sure that you want to restart the Integrated
Administrator? This process will take several minutes.
Are you sure that you want to clear the system log?
Enabling IP Security may disconnect this session. Are you sure
you still want to perform this action?
HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User Guide
Error Messages
Cause
Attempting to disable the
Web (HTTP / HTTPS)
protocol
Attempting to disable the
Secure Shell protocol
Changing an SNMP value
with the SNMP protocol
disabled
Attempting to set a blank
Read Community string
Attempting to power off the
enclosure
Attempting to restart the
Integrated Administrator
Attempting to clear the
system log
Attempting to enable IP
Security
B
B-1