HP Bc1500 - BladeSystem - Blade PC User Manual page 126

Error Messages
Administration Error Messages (continued)
Error Message
The group name is blank. Please enter a
valid name.
The maximum number (20) of groups
exists on the system.
The Password fields are empty. Please
enter a value in each password field.
The Password field is empty. Please enter
a password.
The Confirm Password field is empty.
Please enter a password.
The password must be at least 3
characters in length. Please enter a new
password.
The passwords do not match. Please try
again.
NTP Poll-Interval has to be between 60
and 9999 seconds.
Invalid NTP address supplied. IP address
should be in ###.###.###.### format
where ### is between 0 and 255.
###.###.###.### is not a valid NTP
server.
B-4
Cause
Attempting to create a
group with a blank group
name
Attempting to create a
21st group
Attempting to create a
user with a blank
password
Attempting to create a
user with a blank
Password field
Attempting to create a
user with a blank Confirm
Password field
Attempting to create a
user with a password that
is less that 3 characters
long
Different strings in the
Password and Confirm
Password fields
Attempting to set an NTP
poll interval that is not
between 60 and 9999
seconds.
Attempting to enter an IP
address that is not in the
correct format.
Attempting to set an NTP
server address, but the
address entered is not an
NTP server.
HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User Guide
Valid Input
1-13 characters
including
alphanumeric, dash,
and underscore
characters. The group
name must begin with
a letter.
N/A
3-8 characters
including all printable
characters
3-8 characters
including all printable
characters
3-8 characters
including all printable
characters
3-8 characters
including all printable
characters
3-8 characters
including all printable
characters
60-9999
###.###.###.###
where ### is
between 0 and 255
N/A