HP Bc1500 - BladeSystem - Blade PC User Manual page 56

Command Line Interface
User Account Commands (continued)
Command
ASSIGN BAY
[ALL | <bay
number> {[ , | -
] <bay
number>}]
<group name>
ASSIGNS
USER
<user name>
<group name>
{[VIEW |
MODIFY]}
DISABLE USER
<user name>
ENABLE USER
<user name>
REMOVE
GROUP
[ ALL | <group
name> ]
REMOVE USER
[ALL | <user
name>]
5-6
Description
Assigns one or more bays to a group.
If a bay is already assigned to a group, it must first
be unassigned before executing this command.
Assigns a user to a group with View rights (for group
members) or View/Modify rights (for group
administrators)
If View or View/Modify is not specified, View is
chosen by default.
Disables a user account.
The user is immediately logged out of the system and
prevented from log in until the account us enabled.
Enables a user account that was previously disabled
by the DISABLE USER command
Removes a group and automatically unassigns all
bays within the group.
Removes a user from the system.
If ALL is specified, the command is run for all users
except the default system accounts.
HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User Guide
Restrictions
Only enclosure
administrators may
execute this
command.
The <group name>
is case-sensitive.
Only enclosure
administrators may
execute this
command.
The <user name> is
case-sensitive.
Only enclosure
administrators may
execute this
command.
The <user name> is
case-sensitive. The
administrator
account cannot be
disabled.
Only enclosure
administrators may
execute this
command.
The <user name> is
case-sensitive.
Only enclosure
administrators may
execute this
command.
The <group name>
is case-sensitive.
Only enclosure
administrators may
execute this
command.
The <user name> is
case-sensitive.
Note:
Administrator,
"switcha," and
"switchb," cannot
be removed.