Getting Started
Identifying Integrated Administrator Components
Each HP PC Blade Enclosure interconnect tray ships with the Integrated Administrator module
already installed and provides external connectivity using two connectors on the rear panel.
Ä
CAUTION: Do not plug anything into the enclosure link connectors. They are reserved for future use and
are not designed to accept a 10/100 Ethernet connector.
Integrated Administrator Rear Panel Components
Item
Description
1
Management (10/100 Ethernet) connector for remote access through a Web-based user
interface, Telnet, or Secure Shell.
2
Console (serial) connector for local access to the command line interface using a laptop
computer.
3
Integrated Administrator reset button.
4
Integrated Administrator health LED
5
Enclosure Unit Identification button/LED
Determining the Integrated Administrator's Initial
IP Address
HP recommends that you connect a local client device, such as a laptop computer, to the console
(serial) connector in order to determine the initial IP address used by the network to recognize
the Integrated Administrator. After using that IP address to access the Integrated Administrator
locally using the console (serial) connector, you can use the Integrated Administrator default
values to complete the initial configuration.
The organization of this section reflects this process:
■
Requirements for local client devices
■
Default values for the Integrated Administrator
■
Determining the IP address using the local console
3-2
1 2
3 4 5
HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User Guide