HP Bc1500 - BladeSystem - Blade PC User Manual page 57

User Account Commands (continued)
Command
SET GROUP
{DESCRIPTION
} <group
name>
<description>
SET
PASSWORD
{<password>}
SET USER
CONTACT
{<user name>}
<contact info>
SET USER FULL
NAME
{<user name>}
<full name>
SET USER
PASSWORD
<user name>
HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User Guide
Description
Sets a group's
description.
Sets the password of the
user currently logged into
the Integrated
Administrator. If a
password is not given on
the command line, the
user is prompted for one.
Note: This command is
not valid in SCRIPT
MODE if password is not
specified.
If no <user name> exists,
the command modifies
the contact info of the
user that executed the
command.
Sets a user's full name.
If no <user name> exists,
the command modifies
the full name of the user
that is currently logged
in.
Sets a user's password.
If you do not supply a
password on the
command line, you are
prompted for one.
Note: This command is
not valid in SCRIPT
MODE if password is not
specified.
Restrictions
Only enclosure administrators may execute this
command. The <description> must be 0-20
characters long and can include alphanumeric,
dash, and underscore characters. the default
group description is blank. If spaces are part of
the contact information, enclose the information
in quotes.
The <password> must be 3-8 characters long
and can include all printable characters.
Only enclosure administrators may modify
another user's contact information.
The <user name> is case-sensitive. The
<contact info> must be 0-20 characters long
and can include alphanumeric, dash,
underscore, and space characters. The default
contact information is blank. If spaces are part
of the contact information, enclose the
information in quotes.
Only enclosure administrators may modify
another user's full name.
The <user name> is case-sensitive. The
<contact info> must be 0-20 characters long
and can include alphanumeric, dash,
underscore, and space characters. the default
full name is blank. If spaces are part of this
information, enclose the information in quotes.
Only enclosure administrators may modify
another user's password. Only the
Administrator account may modify the
password of the Administrator account.
The <user name> is case-sensitive. The <new
password> must be 3-8 characters long and
can include all printable characters.
Command Line Interface
5-7