Checking The Leds - Cisco SFE2000P Installation And Configuration Manual

Troubleshooting Overview
Refer to

Checking the LEDs

The front panel LEDS are the most immediate problem-detection mechanism of the platform. Refer to
the following sections for information on SCE 2000 platform LEDS:
•
•
•
•
SCE 2000 Operational Status
The following table lists the operational states of the SCE 2000 . The Status LED on the SCE 2000
Front Panel reflects the current SCE 2000 operational status. The operational status can be displayed
using CLI command show system operation-status.
Table 8-2
SCE 2000 Operational Status
Booting
Operational
Cisco SCE 2000 4xGBE Installation and Configuration Guide
8-4
In oversized packets: 0
Out total octets: 0
Out unicast packets: 0
Out non unicast packets: 0
Out packets discarded: 0
Troubleshooting with the User Log
Front Panel
Information About the Power Supply
SCE 2000 Operational Status
SCE 2000 Operational Status
SCE 2000 Operational States
for an explanation of commands related to the user log.
Description
Initial state after reset
SCE 2000 becomes operational
after completing the following
process:
• Boot is completed
Power self-tests are
•
completed without failure
Platform configuration is
•
applied
Chapter 8 Troubleshooting
Status LED State
Orange
Flashing green
OL-7824-06