Managing Sce 2000 Configurations; Viewing Configuration - Cisco SFE2000P Installation And Configuration Manual

Managing SCE 2000 Configurations

System Operation status is Operational.
Examples for Verifying Operational Status
The following example displays a sample output where the LEDs appear red/orange:
SCE 2000#show system operation-status
System Operation status is Operational
How to View the User Log Counters
View the user log for errors that occurred during the installation process.
At the SCE 2000# prompt, type show logger device User-File-Log counters and press Enter.
Step 1
Examples for Viewing the User Log Counters
The following example shows the current User-File-Log device counters.
SCE 2000#show logger device user-file-log counters
Logger device User-File-Log counters:
Total info messages: 1
Total warning messages: 0
Total error messages: 0
Total fatal messages: 0
If there are "Total error messages" or "Total fatal messages", use the show logger device
User-File-Logcommand to display details about the errors.
Managing SCE 2000 Configurations
The procedures for managing SCE 2000 configurations are explained in the following sections:
•
•
•

Viewing Configuration

When you enter configuration commands, it immediately effects the SCE platform operation and
configuration. This configuration, referred to as the running-config , is saved in the SCE platform
volatile memory and is effective while the SCE platform is up. After reboot, the SCE platform loads the
startup-config , which includes the non-default configuration as saved by the user, into the
running-config .
The SCE platform provides commands for:
•
•
Cisco SCE 2000 4xGBE Installation and Configuration Guide
7-4
Viewing Configuration
How to Save or Change the Configuration Settings
How to Recover a Previous Configuration
Viewing the running configuration
Viewing the startup configuration
Chapter 7 Basic SCE 2000 Platform Operations
OL-7824-06