Managing Sce 2000 Configurations; Viewing Configuration - Cisco CE 2000 Platform SCE 2000 4xGBE Installation And Configuration Manual

Managing SCE 2000 Configurations

E
XAMPLE
The following example shows the current User-File-Log device counters.
SCE 2000#show logger device user-file-log counters
Logger device User-File-Log counters:
Total info messages: 1
Total warning messages: 0
Total error messages: 0
Total fatal messages: 0
If there are "Total error messages" or "Total fatal messages", use the show logger device
User-File-Log command to display details about the errors.
Managing SCE 2000 Configurations
The procedures for managing SCE 2000 configurations are explained in the following sections:
•
•
•

Viewing Configuration

When you enter configuration commands, it immediately effects the SCE 2000 platform operation
and configuration. This configuration, referred to as the running-config, is saved in the SCE
2000 platform volatile memory and is effective while the SCE 2000 platform is up. After reboot,
the SCE 2000 platform loads the startup-config, which includes the non-default
configuration as saved by the user, into the running-config.
The SCE 2000 platform provides commands for:
•
•
After configuring the SCE 2000 platform, you may query for the running configuration using the
command show running-config. This command displays the non-default running
configuration. To view the complete SCE 2000 platform running configuration, including both
default and user-configured configuration, you may use the option all-data in the show
running-config command.
SCE 2000 4xGBE Installation and Configuration Guide
7-4
:
Viewing Configuration (on page 7-4)
Saving the Configuration Settings (on page 7-7)
Recovering a Previous Configuration (on page 7-9)
Viewing the running configuration
Viewing the startup configuration
Chapter 7 Basic SCE 2000 Platform Operations
OL-7824-02