The Rear Ports - Billion 800VGT User Manual

The Rear Ports

The Ethernet Port # 4 can be used as a console port. You need a special
console tool which is included in the package, to connect between LAN
port 4 and a PC's RS-232 port (9-pin serial port).
Port
Power Switch
1
PWR
2
3 RESET
LAN
4 1X — 4X
(RJ-45 connector)
Console Port (LAN port 4)
4
(RJ-45 connector)
Phone
1X — 2X
5
(RJ-11 connector)
LINE
6
7
ADSL
8
Antenna
Chapter 2: Installing the router
Meaning
Power ON/OFF switch
Connect the supplied power adapter to this jack.
When the router is turned on
Reset the router: press for 1-3 seconds:
Restore factory default settings: press for more than 6
seconds, and power cycle the router: (useful if you cannot
login to the router or have forgotten your Username/Password.)
Caution: After pressing the RESET button for more than 6 seconds,
to be sure you power cycle the device.
To connect your router to a PC or an office/home network of
10Mbps or 100Mbps use a UTP Ethernet cable (Cat-5 or
Cat-5e) and connect to one of the LAN ports.
Caution: Port 4 can be either a LAN or a Console port at any time but
not simultaneously.
Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to LAN Port 4
and connect to the computers RS-232 port via the supplied
adaptor.
Caution: Port 4 can be either a LAN or a Console port at any time but
not simultaneously
When using the VoIP functions, connect an analogue phone to
this port using a RJ-11 cable.
When using the VoIP functions, use a RJ-11cable to connect
this port to the telephone wall jack..
Use the supplied RJ-11 ("telephone") cable to connect this port
to the ADSL/telephone wall jack .
Connect the detachable antenna to this port.
Billion 800VGT Router
the reset button is used to:
9