The Rear Ports; Cabling - Billion BIPAC-645 User Manual

2.3 The rear ports

Power
(jack)
Console
(port)
ISDN So
(RJ-45 connector)
LAN 1-4
(RJ-45 connector)
WAN
(RJ-45 connector)

2.4 Cabling

Now you should be ready to connect your BIPAC-645 on your LAN and WAN or ISDN jacks. Follow
these steps to install:
•
Connect the router from EWAN port to an ADSL/cable modem, or attach the ISDN line to the ISDN
connector (S/T interface).
•
Connect the PC to the RJ-45 LAN connector. Two or more PCs can connect to a multi-port Hub first
and then uplink (cascade) port on the hub must be connected to LAN port.
•
Plug the power adapter into a wall outlet and into the AC connector on the back of BIPAC-645.
Connect the supplied power adapter to this jack
Connect the supplied RS-232 cable to this port when connecting to a
PC's RS-232 port (9-pin serial port).
Connect an RJ-45 cable to this port when connecting to the ISDN.
Connect an UTP Ethernet cable to this port when connecting to a
LAN such as an office or home network.
Connect an UTP Ethernet cable to this port when connecting to
the Internet or making other WAN connections
4