Billion 800VGT User Manual page 47

Billion 800VGT Router
PPPoE (multisession)
PPPoE multisession allows the user to create multiple PPPoE sessions using a single PVC, using the
exact same principles as normal PPPoE as described above.
PPPoE with Pass-through Connections
PPPoE with pass-through adopts the following method: PPPoE Routed mode + 1483 Bridge Mode. With
pure PPPoE connection, the router can get one WAN address for the router. With the PPPoE and
PPPoE pass-through, concurrently, it allows users to have a WAN address assigned to the router but also
able to get another WAN IP from their ISP using PPPoE dialler (e.g. WinPoETor Windows XP
PPPoE Dialler) at the same time.
Description: User-definable name for this connection.
VPI/VCI: Enter the information provided by your ISP.
ATM Class: The Quality of Service for ATM layer.
NAT: The NAT (Network Address Translation) feature allows multiple users to access the Internet through
a single ISP account, sharing a single IP address. If users on your LAN have public IP addresses and can
access the Internet directly, the NAT function can be disabled.
Username: Enter the username provided by your ISP. You can input up to 128 alphanumeric characters
(case sensitive). This will usually be in the format of "username@ispname" instead of simply "username".
Password: Enter the password provided by your ISP. You can input up to 128 alphanumeric characters
(case sensitive).
Service Name: This item is for identification purposes. If it is required, your ISP will provide you the
information. Maximum input is 20 alphanumeric characters.
This specifies if the router can get an IP address from the Internet Server Provider (ISP)
IP Address:
automatically or not. Please click Obtain an IP address automatically via DHCP client to enable the
DHCP client functionality or click Specify an IP address to disable the DHCP client functionality, and
specify the IP address manually. The setting of this item is specified by your ISP.
47
Chapter 4: Configuration