Ethernet Client Filter - Billion 800VGT User Manual

Ethernet Client Filter

The Ethernet Client Filter supports up to 16 Ethernet network machines and helps you to manage your
network control, accepting traffic from specific authorized machines or restricting unwanted machine(s)
from access your LAN.
There are no pre-define Ethernet MAC address filter rules; you can add the filter rules that meet your
requirements.
Ethernet Client Filter: Default setting is Disable.
Allowed: check to authorize a specific device to access your LAN by insert the MAC Address in
the space provided or click
Blocked: To prevent unwanted device accessing your LAN, insert the MAC Address in the
space provided or click
The maximum number of clients is 16.
presented only in hexadecimal characters.
Note: Follow the MAC Address Format xx:xx:xx:xx:xx:xx. Semicolon ( : ) must be included.
Candidates: automatically detects devices connected to the router through the Ethernet. .
→ Active PC in LAN
Active PC in LAN displays a list of individual Ethernet device's IP Address & MAC Address which are
connected to the router.
You can easily allow or block a computer by checking the box next to the IP address. Then click Add to
insert to the Ethernet Client Filter table.
Chapter 4: Configuration
. Make sure your PC's MAC is listed.
. Make sure your PC's MAC is not listed.
The MAC addresses are 6 bytes long; they should be
The numbers 0 - 9 and letters a - f are acceptable.
The maximum number of Ethernet clients is 16.
Billion 800VGT Router
31