Table of Contents
Advertisement
Billion 800VGT Router
Setting for Phone Port 1
SIP Service Provider: This section allows you to select your service provider. When the selection is
done, the parameters below are automatically displayed.
Select Profile: This allows you to select a desired VoIP provider whom is not already defined in the SIP
Service Provider list. You may manually setup the SIP accounts by entering VoIP SIP information into a
User-defined Profile.
See below for details.
Phone Number: This is the registration ID of the user as listed in the VoIP SIP registrar
Authentication Username: If the username is same as the Phone Number, leave it blank.
Otherwise,
fill in the space with your username given by your VoIP provider.
Authentication Password: This is the password used for authentication with the VoIP SIP registrar.
Setting for Phone Port 2
Select the Same as Phone Port 1 box to set phone port 2 parameters to be identical to phone port 1.
Otherwise, please refer to descriptions in "Setting for Phone Port 1".
User-defined Profiles
Note: A maximum of 8 user defined profiles are allowed.
100
Chapter 4: Configuration
Advertisement
Table of Contents
