Table of Contents
Advertisement
2.4 The Rear Ports
Port
1
Power Source
2
DC
3
RESET
Wireless On/Off
4
WPS
5
UPS
6
EWAN
7
Gigabit Ethernet
8
USB
9
Phone (1-2)
10
SIM Card slot
11
Antenna
Power source selector. Switch between DC power adapter and UPS (DC).
Connect the supplied DC power adapter to this jack.
After the device is powered on, press it 6 seconds or above: to restore to factory
default settings (this is used when you can not login to the router, e.g. forgot the
password)
By controlling the pressing time, users can achieve two different effects:
(1) Wireless ON/OFF button: Press over 6 seconds to switch on wireless function when
wireless is off and press over 6 seconds again to disable wireless function.
(2) WPS: Press less than 6 seconds to trigger WPS function.
Connect the supplied standardized UPS(DC) to this jack
Connect to Fiber/ Cable/ xDSL Modem with your RJ-45 cable.
Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the three LAN ports when
connecting to a PC or an office/home network of 10Mbps /100Mbps /1000Mbps.
Connect the storage device to this port.
Connect your analog phone set to this port with the RJ-11 cable.
Plug the proper mini SIM card(2FF) into the slot
Connect to the supplied two high performance external antennas
11
Meaning
Advertisement
Table of Contents
