Table of Contents
Advertisement
Billion 800VGT Router
Profile Name: A user-defined name to identify the profile.
Registrar Address(or Hostname): Indicate the VoIP SIP registrar's IP address.
Registrar Port: Specify the port on which the VoIP SIP registrar will listen for register requests from VoIP
devices.
Expire: Expire time for the registration message sending.
User Domain/Realm: Set different domain names for the VoIP SIP proxy server.
Outbound Proxy Address: Indicate the VoIP SIP outbound proxy server IP address. This parameter is
very useful when your VoIP device is behind NAT.
Outbound Proxy Port: Specify the port on which the VoIP SIP outbound proxy will listen for messages.
Phone Number: This is the registration ID of the user as listed in the VoIP SIP registrar.
Authentication Username: Same as Phone Number.
Authentication Password: This is the password used for authentication to the VoIP SIP registrar.
Confirm Password: Re-enter the password for confirmation.
Display Name: This is what will be displayed on a Caller ID system.
General Settings
This section contains the basic settings for the VoIP module from the selected provider in the Wizard
section. If you do not provide correct information here, you will be unable to make calls over
the
Internet.
101
Chapter 4: Configuration
Advertisement
Table of Contents
