Table of Contents
Advertisement
Billion 800VGT Router
Step 3: Setup VLAN Service
Go to Configuration
Advanced
VLAN Bridge
DefaultVlan lists all member ports.
It is necessary to group specific member ports for each VLAN.
From the example, two VLAN groups are requested: Data and Video.
To create another VLAN group for Video, click on Create VLAN.
Give a name and ID (PVID) to identify the Video group. The valid value range for PVID is 1 ~ 4094.
From the example:
VLAN untagged ports for Data/Internet: Ethernet, wireless and wireless_wds.
VLAN untagged ports for Video: ethernet1, rfc-1483-0 ~ rfc-1483-6.
Click Apply to made change effective immediately.
139
Chapter 4: Configuration
Advertisement
Table of Contents
