The Rear Ports
Port
Antenna
1
2
DSL
Line
3
(Router with LINE port only)
Phone
4
1X-2X (RJ-11 connector)
5
USB
Ethernet
6
1X — 4X
(RJ-45 connector)
7
WPS
8
RESET
9
Power
10 Power Switch
Connect the detachable antenna to this port.
Connect this port to the
11 cable (telephone) provided.
Connect this port to the telephone jack on the wall with RJ-11
cable.
Connect this port to an analog phone set with RJ-11 cable.
Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of
Caution: Port 4 can be either a LAN or Console port at a
time but not both.
To be sure the device is being turned on press RESET button
for:
6 seconds and above, power off, power on the device: restore
to factory default settings. (Cannot login to the router or forgot
seconds).
Caution: After pressing the RESET button for more than
6 seconds, to be sure you power cycle the device again.
Connect it with the supplied power adapter.
7
Meaning
button for more than 6