Factory Default Settings - Billion 800VGT User Manual

Factory Default Settings

Before configuring your router, you need to know the following default settings.
Web Interface (Username and Password)
Username: admin
Password: admin
The default username and password are "admin" and "admin" respectively.
If you ever forget the username/password to login to the router, you may
press the RESET button for more than 6 seconds to restore the factory
default settings.
Device LAN IP settings
IP Address: 10.0.0.2
Subnet Mask: 255.255.255.0
ISP setting in WAN site
PPPoE Multisession (the router has the ability to accommodate multiple PPPoE sessions on the
same PVC in factory default state.
DHCP server
DHCP server is enabled.
Start IP Address:10.0.0.100
IP pool counts: 100
LAN and WAN Port Addresses
The parameters of LAN and WAN ports are pre-set in the factory.
LAN Port
IP address
Subnet Mask
DHCP server function
IP addresses for
distribution to PCs
Chapter 3: Basic Installation
10.0.0.2
255.255.255.0
Enabled
100 IP addresses continuing from
10.0.0.100 through 10.0.0.199
Billion 800VGT Router
The default values are shown below.
WAN Port
The WAN protocol has been
pre-selected and
Telkom for automated service
deployment and delivery.
set by
17