QoS - Quality of Service
The QoS function helps you to control your network traffic for each LAN (Ethernet and/or Wireless)
application that accesses the WAN (Internet).
throughput for each application, when the system is running with a fully loaded upstream channel.
Here are the items within the QoS section:
(bandwidth management).
Prioritization
There are three priority settings provided in the Router:
High
Normal (Normal priority is the default for all traffic without any setting)
Low
The ratios of utilization for each priority are: High (60%), Normal (30%) and Low (10%).
You can click Clear to delete the existing Application.
Click Clear
Application: A user-defined description identifying this new policy/application.
Time Schedule: The details of when this rule of your prioritization policy is active.
Priority: The priority given to this policy/application. The default setting is High; you may adjust this
setting to fit your requirements.
Protocol: The name of the supported protocol.
Source Port: The source port of packets to be monitored.
Destination Port: The destination port of packets to be monitored.
Chapter 4: Configuration
It allows you to control the quality and speed of
and
Prioritization
Outbound / Inbound IP Throttling
Billion 800VGT Router
115