Table of Contents
Advertisement
Billion 800VGT Router
Time Schedule: The user-defined time period during which your virtual server is enabled. You may
specify a time schedule or you can select Always on for this Virtual Server Entry.
For setup and details,
refer to the Time Schedule section
Application: This is a user-defined description to identify this entry. You can also click on
to select existing predefined rules.
: 20 predefined rules are available. Click on the Radio button to select the rule; Application,
Protocol and External/Redirect Ports will be filled after you make a selection.
Protocol: This is the protocol to be supported by the virtual server. In addition to specifying the port
number to be used, you will also need to specify the protocol used. The protocol used is determined by
the particular application. Most applications will use TCP or UDP;
Define a public/ WAN IP address for this Application to use.
Global IP:
External Port: The Port number on the Remote/WAN side that is used when accessing the virtual server.
Redirect Port: The Port number that the Local server on the LAN network will be listening on.
Internal IP Address: The private IP, on the LAN network, of the virtual server application.
Lists all the existing Computer connections on the network. You may assign a Computer by
IP address or MAC address from this list.
Select the Apply button to apply your changes.
126
Chapter 4: Configuration
Advertisement
Table of Contents
