Table of Contents
Advertisement
Billion 800VGT Router
System
Here are the items within the System section:
Time Zone, Remote Access, Firmware Upgrade,
Backup/Restore, Restart
and
User Management.
Time Zone
This router does not have a real time clock on board; instead, it uses the Simple Network Time Protocol
(SNTP) to get the current time from an SNTP server outside your network. Choose your local time zone,
click Enable and click the Apply button. After a successful connection to the Internet, the router will retrieve
the correct local time from the SNTP server you have specified. If you prefer to specify an SNTP server
other than those in the list, simply enter its IP address as shown above. Your ISP may provide an SNTP
server for you to use.
Daylight Saving is also known as Summer Time Period. Many places in the world adopt this during
summer time to move one hour of daylight from morning to the evening in local standard time. Check
Automatic box to automatically set your local time.
Resync Period (in minutes) is the periodic interval the router will wait before it re-synchronizes the
router's time with that of the specified SNTP server. In order to avoid unnecessarily increasing the load on
your specified SNTP server you should keep the poll interval as high as possible – at the absolute
minimum every few hours or even days.
52
Chapter 4: Configuration
Advertisement
Table of Contents
