Setting Voice Output; Setting The Vocal Announcement; Of Traffic Reports - Becker Online Pro 7800 Operating Manual

Setting voice output

Here you can set whether the voice output of
navigation announcements are mixed with the
current audio source, the current audio source is
muted during navigation announcements, or
whether the volume of the
announcements can be set independently of the
volume of the current audio source.
Select and confirm Voice announcement
System Settings menu.
Turn the right rotary control
desired setting. A setting can be activated (
pressing the right rotary control .
Confirm your selection by pressing and holding
the right rotary control .
•
Mix with audio
Navigation announcements are mixed with the
current audio source.
•
Switch audio to mute
The current audio source is muted when a
navigation announcement is made.
•
Set volume freely
The volume of navigation announcements can
be set independently of the audio source during
a navigation announcement.
Setting the vocal announcement of
traffic reports
You may choose the type(s) of traffic announce-
ments to be read aloud.
Traffic announcements are given depending upon
navigation
route calculation and receipt of new announce-
ments.
Set and confirm
Settings menu.
in the
The items
Traffic announcement update
Warning announcement
Only on route
are available for selection
• Turning voice announcement of all traffic an-
to select the
nouncements on or off: Set
) by
nouncement update
By pressing the right rotary control
choose between Voice Warning Announce-
ments On (
lection by pressing and holding the right rotary
control .
in the System
Traffic news
,
and
Traffic an-
.
, you can
) or Off ( ). Confirm your se-
Using Navigation
• Turning all warning announcements on or off:
Activate Traffic announcement
as described above.
Set Warning announcement .
Press the right rotary control
tween All Warning Announcements On (
or Off ( ). Confirm your selection by press-
ing and holding the right rotary control
• Turning Voice Announcement of route-relevant
traffic announcements on or off:
Activate Traffic announcement
as described above, and it set to
route .
Press the right rotary control
tween Voice Announcement of route-relevant
traffic announcements On ( ) or Off (
Confirm your selection by pressing and holding
the right rotary control .
update
to choose be-
)
.
update
Only on
to choose be-
).
125