Entering Destination - Becker Online Pro 7800 Operating Manual

Entering destination

Select the letters one after the other by turning the
right rotary control and press the control to con-
firm. The selected letter appears enlarged at the
right of the display.
Use the multifunction button
last confirmed letter.
The complete entry can be deleted by pressing
multifunction button for more than
2 seconds.
Already entered letters are displayed inversely. To
help, the name of the location closest to the previ-
ous entry is displayed. The unit offers only the pos-
sible remaining letters for selection. If no other
entries are available, the unit completes the place
name automatically.
To accept the entry, press and hold the right rotary
control for more than 2 seconds or select the
small check mark and briefly press the right ro-
tary control .
If the complete location name was entered or com-
pleted automatically and the location name is
unique in the country of destination, the location is
accepted.
The programme will return to the destination en-
try.
If an incomplete location entry was confirmed, the
location selection list is displayed.
The location name most similar to the entry ap-
pears in capital letters in the location selection list.
to delete the
The scroll marks indicate that other locations, sort-
ed in alphabetical order, can be selected.
To make your selection turn the right rotary
control and press the control to confirm. (See
"General instructions" on page 102.)
If a definite entry is given, the programme returns
to the destination entry.
The location distinguishing list is displayed if the
selection is ambiguous.
Select the required location using the right rotary
control and press the control to confirm.
The programme returns to the destination entry.
Using Navigation
Entering destination town postal code
Select the postal code numbers one after another
by turning the right rotary control
confirm. The selected number appears enlarged at
the right of the display.
To accept the entry, press and hold the right rotary
control for more than 2 seconds or select the
small check mark and briefly press the right
rotary control .
The display then shows either the destination cor-
responding to the postal code or, if the postal code
is shared among several towns, a list containing
these towns.Select the required location using the
right rotary control and press to confirm.
If more than 20 locations share the same post code,
the display will show the Location Input menu in-
stead of the above-mentioned list. In that case, the
town name is to be entered as described in "Enter-
ing destination" on page 105.
and press to
105