Setting The Gal (Gal); Display Colour Setting (Col) 171 172 - Becker Online Pro 7800 Operating Manual

User menu Call up / quit User Settings menu
After opening the User Settings menu, the follow-
ing Basic Settings can be set in three menu levels
according to your personal preference.
First level:
• - Speed dependent volume control (GAL)
Gal
• - Setting for display colour
Col
• - Display setting
Lcd
• Led - LED setting
• Lum - Setting for display brightness
• - Setting for reception optimisation
M/S
Second level:
• - Setting for the AUX input
Aux
• - Setting for signal tone volume
BeV
• - Setting for turning direction of rotary
Inc
control
• - Setting for volume display
Vol
• Mic - Hands-free microphone setting
Third level:
• HsV - Volume setting for optional handset
• - Limits the maximum audio volume level
Lim
• - Adjusts the digital audio source (CD etc.)
Lvl
volume
• - Call up reset function
Rst
To call up the User Settings menu, press the
button for more than 2 seconds.
Press multifunction button
second and third level of the User Settings menu.
To exit the User Settings menu, press one of the
buttons , , or .

Setting the GAL (Gal)

The GAL is a control circuit within the car radio
which adapts the radio volume to the vehicle
speed. This functions as a compensation for
driving noises resulting from higher speeds.
Call up the General Settings menu. Press multi-
function button . With the right rotary
control select either or .
0 +15
With the GAL setting, the amount of volume con-
trol can be specified according to vehicle speed.
The setting is stored automatically.
The settings are from:
• 0 - no volume increase
• - slight volume increase (low noise levels in
+1
interior - low-noise vehicle).
• - high volume increase (high interior noise
+15
levels - noisy vehicle).
to reach the
Display colour setting (Col)
This setting is used to choose between two illumi-
nation colours (not available for all models).
To set, call up the General Settings menu. By
pressing multifunction button
or .
red yellow
The setting is stored automatically.
User settings
, select either
171