Selecting / Deleting Direct; Switching Mute Function On Or Off; Interrupting Tp Announcements; Tp Announcement Volume - Becker Online Pro 7800 Operating Manual

Selecting / deleting direct program-
ming
Activate the TP menu.
Selecting: Press multifunction button
Using the right rotary control , select the desired
TP transmitter and press the control to confirm.
After a short delay and without actuation, the se-
lected transmitter is accepted.
Deleting:Press multifunction button
Select Autoselect with the right rotary
control and press the control to confirm. After a
short delay and without actuation, direct program-
ming is deleted.
Quit the TP menu.

Switching mute function on or off

After selection of a TP or EON transmitter, the
mute function can be activated by pressing the
button briefly.
.
Thereafter, only traffic announcements and navi-
gation announcements will be passed through. The
mute function is cancelled by pressing the
button again.

Interrupting TP announcements

Briefly press the
.
nouncement.
The announcement currently being broadcast will
be interrupted and the system will automatically
return to the previously selected mode.

TP announcement volume

Activate the TP menu. Press multifunction
button .
With the right rotary control
tings ( 0 - +3 ) can be selected. This means that the
volume can be raised to a fixed value according to
the setting.
• Setting
• Setting
• Setting

Display for TMC stations

If a radio station broadcasts TMC information in
addition to radio programming, this is indicated by
the abbreviation
tion is received and analysed by the navigation
system. The reception of traffic announcements is
free of charge.
button during the TP an-
, four different set-
Radio mode
0 - no increase
- slight increase
+1
- strong increase
+3
in the display. TMC informa-
TMC
163