Settings; Selecting The Units - Becker Online Pro 7800 Operating Manual

Using Navigation
• Turning route-relevant traffic announcements
on or off:
Activate Traffic announcement update
Warning announcement and
route as described above.
If all entries are active, only the warning an-
nouncements relevant for the route will be is-
sued.
Exit the traffic announcements Set-up menu by
pressing the right rotary control
2 seconds.
126

Settings

,
Only on
Set and confirm Settings
menu.
The entries
Announcement ETA
Animation in menus
are available for selection
• Turning announcement of Arrival Time on or
off:
Set Announcement ETA
for more than
By pressing the right rotary control
choose between Arrival Time On (
Off ( ). Confirm your selection by pressing
and holding the right rotary control
• Turning Menu Animation on or off:
Set Animation in menus
By pressing the right rotary control
choose between Menu Animation On (
Off ( ). Confirm your selection by pressing
and holding the right rotary control
Exit the Setting menu by pressing the right rotary
control

Selecting the units

in the System Settings
and
Set and confirm
Settings menu.
.
Select the preferred unit of measurement. Pressing
the right rotary control
On (
Exit the Measurement unit setting menu by press-
, you can ing the right rotary control
) and 2 seconds.
. Note:
Metric
al stands for calculation in yards.
.
, you can
) and
.
for more than 2 seconds.
Measuring unit in the System
then selects either
) or Off ( ).
for more than
stands for calculation in metres.
Imperi-