Call Up Route List; Information During Non-Active; P.o.i - Becker Online Pro 7800 Operating Manual

Call up route list

During route guidance, the planned route can be
called up via the route list, and the relevant traffic
announcements for the route can be displayed.
Press multifunction button .
The current road and the road names up to the des-
tination are displayed. Scroll through the route list
by turning the right rotary control
Note:
After entering the destination, it will take some
time until the route list is compiled.
If the vehicle is currently in an "off road" area
when the destination is entered, no route list can be
compiled until a stored road is reached. If no route
list is yet available, the multifunction button
is not displayed.
Information during non-active route
guidance
Press the left rotary control
If possible, the current position with location and
street is displayed.
• By pressing the multifunction button
journey duration, kilometres travelled and the
average speed of the last navigation route can be
displayed. See "Requesting journey duration
and kilometres travelled" on page 119.
• By pressing the multifunction button
.
of received traffic announcements is displayed
(see page 120).
• The time is displayed by pressing the
multifunction button
current time" on page 119.
• The current position can be called up or stored
by pressing the multifunction button
"Requesting current position" on page 120.

P.O.I.

Menu for selecting points of interest from a prede-
termined list or points of interest that are stored on
.
the Beckerclub homepage. Points of interest in-
clude petrol stations, airports or hospitals, for ex-
ample.
With the right rotary control, select
the
the Main Navigation Menu and press the control to
confirm.
a list
The items
National
Surrounding area
Country/town
. See "Requesting
@ P.O.I.
become available.
. See
With the right rotary control
a selection.
Using Navigation
in
P.O.I.
,
,
and
, make and confirm
121