Removing The Portable Panel; Attaching The Portable Panel - Becker Online Pro 7800 Operating Manual

Anti-theft device
The PIN number does not have to be entered
immediately. By pressing one of the source keys
, and , you can select one of the available
audio sources.
No telephone-related functions, however, are
available in such a case.
This condition is indicated by
To enter the PIN number, first, you need to press
the source key .
A new request for the PIN number appears.
Note:
If the unit or the ignition is shut off, the PIN
number will be requested again when the unit or
ignition is turned back on. To operate the
telephone, re-enter your PIN number as described
above.
The PIN number can also be stored as described
under "PIN Settings" on page 139. It is then no
longer necessary to enter the PIN every time you
switch on the unit.
98

Removing the portable panel

As effective anti-theft device, the portable panel
(A) may be removed from the unit.
Press briefly (storage medium remains in the
unit). The display folds forwards. The portable
component can then be pulled out.
on the display.
The volume is limited to a maximum level after the
display has been folded down. After 20 seconds,
an audible signal indicates that the control
component is folded down. The unit then switches
itself off.
G
Danger
Injury hazard
For safety reasons, the portable panel may not be
left open while driving.
Note:
After removal, please insert the portable panel in
the accompanying protective cover.
Do not touch the metal contacts on the portable
panel or on the radio.

Attaching the portable panel

Insert the portable panel into the lower left catch
and then engage it in the lower right catch. Then
fold up the portable panel and engage it in the
upper catches.
The portable panel can also be placed flat against
the unit and pushed into place.
To ensure correct function, be sure that the
portable panel is completely seated in all four
catches.
If a new portable panel or one from another unit is
used, the code number must be entered as
A
described above to activate the unit.