Volume For Voice Output; Automatic Dialogue - Becker Traffic Pro 7949 Operating Manual

Settings

Volume for voice output

You can set the volume for announce-
ments from your Traffic Pro here.
Select
X
mode settings.
7007
X Select
.
Note:
Only one of the two settings may be
active ( ) at the same time.
•
You can set the volume for announce-
ments independently of the volume set
for the audio source.
•
The volume for announcements can be
set in a specific range based on the
volume set for the active audio source.
96
X For the
.
in the voice
7008
X Turn the rotary control/push button
to select the required volume.
Note:
If you have previously selected
or
, you can set the volume in the
range between -10 and +10. In this case,
a negative value means that announce-
ments will be made more quietly than
the selected volume for the audio
source.
setting, select

Automatic dialogue

You can specify which events (e.g. stor-
ing a radio station) should trigger auto-
matic voice dialogue here. Automatic
dialogue refers to automatic information
retrieval on the Traffic Pro following
specific events.
X Select
mode settings.
7009
Next, select the required event.
X
Turn the rotary control/push button
X
to switch the required function on ( )
or off ( ).
in the voice