Driving To One Of The "Last Destinations; Last Destination" Destinations; Route Mode; Saving And Deleting Last Destination" Destinations - Becker Online Pro 7800 Operating Manual

@ Route Mode

By selecting
Activate @ route
pressing the right rotary control
tion to the destinations loaded from the homepage
is started automatically.
Once you have reached the first destination, route
calculation to the next destination is started auto-
matically.
Note:
If no destinations have been loaded from the
homepage,
Activate @ route
played between brackets and cannot be selected.
Last destinations
and
mode
A list of the last 50 destinations is displayed. Stop-
route calcula-
overs are not stored as last destinations.
Driving to one of the "Last Destina-
tions"
In the Main Navigation Menu, select
is dis-
mode
with the right rotary control and press the
Memory
control to confirm.
Select the desired destination with the right rotary
control and press the control to confirm.
Then start route guidance.
Additional information on the destination can be
called up by pressing the left rotary controls
fore confirming selection.
Using Navigation
Saving and Deleting "Last Destina-
tion" destinations
In the Main Navigation Menu, select
with the right rotary control and
destinations
press the control to confirm.
Dest.
Select the destination to be saved or deleted with
the right rotary control
the left rotary control
Press the multifunction button
destination memory and save the destination. See
be-
"Destination memory" on page 109.
Last
and confirm by pressing
.
, to call up the
113