Call Settings - Becker Online Pro 7800 Operating Manual

Telephone mode
• Car License Plate
After the number has been dialled, enter your
vehicle licence number.
Enter your vehicle licence number. Entry is the
same as for entering a new name for a new
telephone book entry (Seite 131).
When you have entered the complete licence
number, store your entry by pressing and
holding the right rotary control
• Car registration country
Next, select the country in which your vehicle is
registered.
Turn the right rotary control
country of registration. The country is selected
and stored by pressing the right rotary control.
136
Settings
In the Telephone Settings menu, telephone-specif-
ic settings can be made.
Note:
Not all of the function described may be supported
by the network provider.
To call up the Telephone Settings menu, press
the key in the Communications menu.
.
Select
Telephone
and press the control to confirm.
For telephone-specific settings, selection of

Call settings

to select the
Telephone settings
PIN settings
Call forwarding
SMS (see also page 145) and
Block
can be made by turning, and confirmed by press-
ing, the right rotary control
Call settings
In the Telephone Settings menu, select
settings
press the control to confirm.
A selection from
with the right rotary control
can be made by turning, and confirmed by press-
ing, the right rotary control
Briefly press the right rotary control
On (
Pressing the right rotary control
,
2 seconds accepts all settings and exits the menu.
,
,
•
,
.
•
with the right rotary control
,
Automatic redial
and
Transmit own number
Accept call automatic.
.
) or Off ( ).
for more than
(Automatic redial)
Automatic redial
If a dialled number is busy, the number will be
redialled automatically 3 times in intervals of
1 minute if function ( ) is active.
If another number is dialled or accepted within
that period, the automatic redial is cancelled.
Transmit own number
When the function is active ( ) your number
will be sent to the person you are calling.
Call-
and
to select