Selecting Intersection For; Starting The Route Calculation - Becker Online Pro 7800 Operating Manual

Using Navigation
shown in parentheses.
If the street number entered is available, the pro-
gramme returns to the Destination Entry menu.
If the street number entered is not available, the
street number range list is displayed. A street
number range can now be selected.
Select Start... to start route calculation.
Note:
Due to system configurations, route guidance will
only be given up to the range of the entered street
number.
108
Selecting intersection for destination
road
This function can only be selected if this informa-
tion is contained in the navigation CD.
Select in the Destination Entry
Crossing
menu with the right rotary control, and press the
control to confirm.
Select the intersection for the destination road by
turning the right rotary control
control to confirm.
The programme will return to the Destination En-
try menu.
If you select Start... the route calculation is
started.

Starting the route calculation

Once the destination is completely entered in the
Destination Entry menu, select
Start
right rotary control.
Route calculation begins, using the route option
settings (fastest, shortest or dynamic route).
Route options
With the route options, the calculation of the route
can be influenced.
Select
Route settings
menu using the right rotary control
confirm.
Select from
Fast route
and press the Dyn. route RDS
Dyn. route TDS
Short route
Avoid Ferry
Avoid Motorway
Avoid Toll
Avoid Tunnel
Private route
Bussiness route
by turning, and change the settings by pressing the
right rotary control
( ).
Press the control for more than 2 seconds to accept
all settings and exit the menu. The route calcula-
with the
tion is started.
Only one of the settings,
,
route RDS Dyn.
, can be activated at once. The restriction
route
in the Destination Entry
and press to
,
,
,
,
,
,
,
and
to select On ( ) or Off
,
Fast route Dyn.
or
route TDS Short