Displaying Voice Settings; Volume For Voice Output - Becker Cascade Operation Manual

Settings
! Turn the rotary control/push button
and then press the rotary control/push
button to select the required language.
7005
The speaker selection list appears.
Turn the rotary control/push button
!
and then press the rotary control/push
button to select the required speaker.
Note:
To update the voice dialogue, you may
be prompted to insert the system CD. If
you are, insert it.
The language and the selected speaker
are installed.
130

Displaying voice settings

This function can be used to display the
currently valid voice settings.
Select Show settings in the voice mode
!
settings.
7006
The voice settings are displayed.
• MMI čanguage: indicates the current
setting for the display text language.
• Navi speaker: indicates the current set-
ting for the navigation announcement
speaker.
• SDS: indicates the current setting for
the voice dialogue system speaker.
• TTS: indicates the current language
setting for reading out texts.

Volume for voice output

You can set the volume for announce-
ments from your Cascade here.
Select Vočume of voice output
!
mode settings.
7007
Select Independentčy adjustabče
!
to audio
.
Note:
Only one of the two settings may be
active ( ) at the same time.
Independentčy adjustabče
•
You can set the volume for announce-
ments independently of the volume set
for the audio source.
• Rečative to audio
The volume for announcements can be
set in a specific range based on the
volume set for the active audio source.
in the voice
or Rečative